Electromagnetic Flow Meters

Flo Motion MS501

Accuracy to +/-0.2%
Lower cost than flanged units.
Six sizes from .125" to .75" Pipe Diameters.
Flow ranges from 0.034 to 49.84 GPM.
Standard Pressure: 230 PSI.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Wide range of process connection types; threaded, flanged, tri-clamp or compression.
Bi-directional flow measurement.
No pressure drop through sensor.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.

High sampling rate (400 samples/second) for short duration flows.
Accuracy to +/-0.2%.
Lower cost than flanged units.
Six sizes from .125" to .75" Pipe Diameters.
Flow ranges from 0.34 to 49.84 GPM.
Standard Pressure: 230 PSI.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Wide range of process connection types; threaded, flanged, tri-clamp or compression.
Bi-directional flow measurement.
No pressure drop through sensor.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.

Accuracy to +/-0.4%
Low cost.
Five sizes from 1/8" to 3/4" Pipe Diameters.
Flow ranges from 0.03 to 50 GPM.
Standard Pressure: 230 PSI.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Bi-directional flow measurement.
No pressure drop through sensor.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.

Accuracy to +/-0.2%
Lower cost than flanged units.
Twelve sizes from 1/2" to 16" Pipe Diameters.
Flow ranges from 0.85 to 19,934 GPM.
Standard Pressure: 230 PSI.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Bi-directional flow measurement.
No pressure drop through sensor.
Optional Integral ground electrode eliminates grounding rings with plastic piping systems.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.

Accuracy to +/-0.2%
Ten sizes from 1/8" to 4" pipe diameters.
Flow ranges from 0.034 to 1246 GPM.
Standard Pressure: 230 PSI.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
Bi-directional flow measurement.
No moving parts for zero maintenance.
No pressure drop through sensor.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.
Rated for 3A sanitary approval.
Suitable for vacuum service applications.

Accuracy to +/-0.2% of rate from 1 to 33 ft/sec.
Nineteen sizes from 1" to 48" Pipe Diameters.
Flow ranges from 2.37 to 179,400 GPM.
Pressures to 5600 PSI.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Bi-directional flow measurement.
No pressure drop through sensor.
Optional Integral ground electrode eliminates grounding rings with plastic piping systems.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.

Accuracy to +/-2.5%
Three sizes for 3" to 80" Pipe Diameters.
Flow ranges from 24.3 to 498,359 GPM.
Pressures to 235 PSI.
Can be removed and reinstalled in non-pressurized lines.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Bi-directional flow measurement.
Every sensor is factory wet-calibrated.

Accuracy to +/-2.5%
Four sizes for 12, 20, 28 & 40" Pipe Diameters.
Flow ranges from 340 to 120,000 GPM.
Pressures to 230 PSI.
Can be removed and reinstalled under pressure (when equipped with ball valve).
"Push-in" type insertion/retractor assembly for quick profiling.
Optional pressure transducer.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Bi-directional flow measurement.
Every sensor is factory wet-calibrated.

Low Cost
Accuracy to +/-1%
Three sizes for 1", 2" and 3" Pipe Diameters.
Flow ranges from 2.4 to 800 GPM.
Standard pressure: 90 PSI.
Fast clamp-on installation.
Integral o-rings.
Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
No moving parts for zero maintenance.
Bi-directional flow measurement.
No pressure drop through sensor.
Minimal straight pipe run required.
Every sensor is factory wet-calibrated.